If you need further assistance or prefer to place your order for tarpaulins over the phone then please do not hesitate to contact us on Tel: 01580 754484.

This is the original tan coloured wax treated Heavy Duty Cotton Canvas Tarpaulin - approx. 540grams per square meter, made from water resistant cotton duck which is suitable for more severe conditions and rugged purposes.

Suggested Uses: Boat Cover, Car or Truck Cover, Farm Equipment Cover, Machine Cover, Camping Ground Sheet, Wind Protector, Privacy Wall, Picnic Mat, Roof Rack Cover, Paint Shield, Haystack Cover, Pool Cover, Patio Furniture Cover, etc.

Canvas tarpaulin's are heavier, thicker and have better strength properties compared to standard polyethylene manufactured tarpaulins and well worth the extra investment if you require an extra tough cover that is going to last for years to come.

Each tarp is wax processed to make the cover water resistant and rot proof. Seams on all the tarpaulins are 1" double row stitched and the hems are 1.5" with edges folded inside and single stitched. It has rust resistant brass eyelets spaced at approx. 90cm (3ft) intervals on all four sides and reinforced corners with double thickness triangular corner patches

540gsm Cotton Canvas, 100% Water Resistant, 100% Rot proof, Extremely Durable, Tear And Stretch Resistant, Eyelet's At Each Corner And At Approx. 90cm Intervals, Environment Friendly, Commercial, Industrial And Home Uses

Canvas Tarpaulins are pre-waxed at the time of manufacture, however, they will benefit from being re-treated approximately once per year with a wax solution. Please also note that as canvas tarps are manufactured with stitched hems and seams (more than one piece of canvas may be used to make a complete tarp), this means that although they are water resistant, they may not be fully waterproof as seepage through the seams is possible if water is left to pool on the canvas.

All sizes are approximate industry standard 'cut sizes' of material before being made into a tarpaulin. Therefore expect the 'finished size' to be up to 9" (22cm) shorter both sides to allow for hems and seams in the finishing process.